Table of Contents
Advertisement
OPERATION
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (8).
FLASHING LED
If the front panel does not install in the
main unit, the LED (12) will be flashing.
REMOTE SENSOR
Point the remote control handset to the
remote sensor IR (24). Press the function
keys on the handset to control the system.
ESP FUNCTION
If the unit has the electronic shockproof
function, it can be shockproof about
several tens of seconds .
RESET FUNCTION
RESET button (25) must be activated
with either a ballpoint pen or thin metal
object.
The RESET button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (25), the
unit can't work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD button (6) shortly to
select radio mode, the radio mode
appears in the display together with
the memory band and frequency.
SELECTING THE FREQUENCY
BAND
At radio mode, press BND/LOU
button (13) shortly to select the
desired band.
The reception band will change in the
following order:
FM1
FM2
SELECTING STATION
Press TUNE/RACK
or button
TUNE/RACK
shortly to activate automatic seek
function. Press for several seconds
until "MANUAL" appears on the
display, the manual tuning mode is
selected. If both buttons have not
been pressed for several seconds,
they will return to seek tuning mode
and "AUTO" appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (18) for
several seconds, the radio searches
from the current frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into
the corresponding preset number
button.
- Program scanning
Press AS/PS button (18) shortly
to scan preset station, When the
field strength level is more than the
threshold level of stop level, the
radio is holding at that preset
number for several seconds with
release mute, then searches again.
STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds (until
2ND beeps come out), current station
is stored into the number button.
11
FM3
FM
MW
button(16)
(17)
Advertisement
Table of Contents
