LG CineBeam PH510P Owner's Manual page 26

26
How to Install the Projector On a Tripod
• You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on
the tripod.
• When stabilizing the tripod, we recommend using a locking bolt of
standard size 4.5 mm (0.1 inch) or less. The maximum size allowed for
the locking bolt is 5.5 mm (0.2 inches).
(If it is longer than the maximum allowed size, it may damage the
projector.)
Bottom side of the
projector
The projector is
connected to this part.
CAUTION
• If you are using a tripod, be careful not to apply external force to the
tripod. Doing so may damage the projector.
• Do not place the tripod on an unstable surface.
• Be sure to use a tripod with a maximum load capacity of 3 kg
(6.6 lbs) or more.
•
To use the projector safely, position the tripod legs so that they are
as wide and stable as possible and be sure to securely attach the
projector to the tripod.
+
Tripod
Bolt used to
attach the
projector
⇒