Channel Installation; Channel Update; Manual Channel Update; Reception Quality - Philips 81 5 Series User Manual

6

Channel Installation

6.1

Channel update

While watching a TV channel, you can perform the
channel scan by...
1 - Press MENU > Navigation Keys up
> Channels > New Channels Available and
press OK.
2 - Follow the on-screen instructions and press OK.
3 - Select Done and press OK to close.
6.2

Manual Channel Update

You can always start a channel update yourself.
To start a channel update manually...
1 - While watching TV, press MENU > TV options
> Settings > Channel > Channels and select one of
below options.
Channel Scan - this kind of scan will auto install
digital channels and analogue channels.
Updte Scan - refers to an incremental scan, which
only scans the frequencies that Channel Scan has not
scanned.
Single RF Scan - is digital manual scan, this allow user
to scan specific frequency by pressing left or right
Navigation Key on the RF Channel item.
2 - Enter your PIN code if necessary.
3 - This can take a few minutes.
4 - Press Back, repeatedly if necessary, to close the
menu.
6.3

Reception Quality

You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel...
1 - While watching TV, press MENU > TV
options > Settings > Channel >
Channels > Single RF Scan and press OK.
2 - Select RF Channel.
3 - Press Navigation keys left or right to select a
channel and press OK. The signal level and signal
quality is shown for this channel.
4 - Press Back, repeatedly if necessary, to close the
menu.
11