Emprex ME1 User Manual page 14

B. Component (YPbPr) video and audio output connection (To
have better video quality)
Plug the black mini plug of the supplied Component video extension cable into
the YPbPr jack on the ME1. Use a component (YPbPr) video cable (NOT
supplied) to connect the component video extension cable and component
(YPbPr) video input port on your TV or monitor. Be sure to match the color of
the plug with color of the jack on TV or monitor. ME1 supports NTSC and
PAL progressive scan, 720p, and 1080i component video output.
Use the supplied composite AV cable to connect the AV extension cable and
audio input jack of the component input port on your TV or monitor. Be sure
to match the color of the plug with color of the jack on TV or monitor.
Note:
1. Standard component video cable is NOT included. In order to have
good video quality, to use a standard YPbPr component video cable is
suggested.
2. Only one of the two connections described above is required.
Figure Component (YPbPr) connection
13