Functions - Heat Controller VMH C Series Service Manual

Service Manual
2. Function
Indoor unit
Operation by remote controller
Sensing by room temperature Senses room temperature
Room temperature control
Maintains the room temperature in accordance
Maintain the room temperature in accordance
with the setting temperature.
with the temperature setting.
Anti-freezing control in cooling
Prevents the water from freezing on evaporator by
sensing the evaporator pipe temperature in cooling
mode.
Time Delay Safety control
Restarts after for approx. 3 minutes to
Restarting after for approx. 3 minutes to
protect the compressor. protect the compressor.
Indoor fan speed control
Turbo wind, high, med, low, auto.
Two-direction air vane
The unit will decide the louver direction
according to operation mode.
Sleep mode auto control
The fan is turned to low speed
(cooling/heating).
The unit will turn off after seven hours.
Independent dehumidification
The function is usually used on rainy days
in springtime or damp areas to remove to
moisture from the air.
Air flow Direction control
The louver can be set at the desired position or
swing up and down automatically
Auto mode
The mode can be changed automatically by the
room temperature.
Temp. Compensation
VMH 30, 36 SerieS
6
8
Follow me (optional)
Timer function
Ionizer (optional)
Self-diag. function
Anti-cold function
Prevents indoor unit from blowing
cold air when the unit starts up..
Auto defrost
Auto-restart function
When the power supply is
interrupted and then restored,
the air conditioners
automatically restores the
previous function setting.
Flexible wiring connection
Heat Controller