Sensors; Automatic Load Sensing; Unbalanced Load Detection System; Aquasensor - Bosch WAY32862ME Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Sensors

en
H
Sensors
A utomatic load sensing
S e n s o r s
Depending on the type of fabric and
load, the automatic load sensing
function optimally adjusts the water
consumption and programme duration
in each programme.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Place large and small items of
Note:
laundry evenly in the drum.
~ Page 44, ~ Page 61

AquaSensor

Depending on the program and model
During a rinse cycle, the Aqua sensor
checks the turbidity of the rinsing water
(turbidity is caused by dirt and
detergent residue). The duration and the
number of rinse cycles depend on the
turbidity of the water.

Load sensor/display

The load sensor detects the load level
in the washing machine when the door
is open. This is indicated by the bar
filling on the display panel.
In order for the load sensor to
Note:
fully determine the amount of laundry,
the drum must be empty before the
washing machine is switched on.
54

Dosing recommendation

The dosing recommendation indicates a
recommended detergent dosage as a
percentage, depending on the selected
programme and the detected load. The
indicated % refers to the dosing
recommendation of the detergent
manufacturer.
By adhering to the dosing
Note:
recommendation, you can help look
after both the environment and your
household budget.

Advertisement

Table of Contents
loading

Table of Contents