Chapter 4: BIOS Setup
4.3.3 SATA and RST Configuration
Item
SATA Controller(s)
SATA Mode Selection
Use RST Legacy OROM
Port1
SATA Device Type
Port2
SATA Device Type
Port3
SATA Device Type
Options
Disabled,
Enabled[Default]
AHCI[Default] ,
Intel RST Premium With
Intel Optane System
Acceleration
Disabled[Default] ,
Enabled
Disabled,
Enabled[Default]
Hard Disk Drive
Solid State Drive[Default]
Disabled,
Enabled[Default]
Hard Disk Drive
Solid State Drive[Default]
Disabled,
Enabled[Default]
Hard Disk Drive
Solid State Drive[Default]
SIO-W221-8365UE
Description
Enable/Disable SATA Device.
Determines how SATA controller(s) operate.
Use RST Legacy OROM when CSM is Enabled.
Note: When you see the POST screen, Please
press <CTRL-I> to into Legacy RAID setting
interface.
Enable/Disable SATA Port.
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
Enable/Disable SATA Port.
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
Enable/Disable SATA Port.
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
l User's Manual
49