General Information; Introduction; Unpacking And Inspection; Design Data - Cornelius CH Series Operator And Installation Manual

Hide thumbs Also See for CH Series:

Operator's manual (18 pages)

Table Of Contents

Table of Contents

NTRODUCTION

The Cornelius "CH" Series Recirculating Water Chiller is designed to provide an accurate, reliable and user-friendly

system for cooling a continuous flow of water and keep it at a constant temperature in various closed loop or tank

cooling applications.

The "CH" Series Chiller consists of an air-cooled refrigeration system housed in a sturdy sheet metal frame and

cabinet. A standard pump and insulated water reservoir package provides a complete liquid cooling and circulating

system.

The "CH" Series Chiller is designed to operate in a clean laboratory or industrial environment where ambient

temperatures range from 40 to100° F (5 to 38° C). With proper installation, operation and maintenance, the "CH"

Series Chiller will provide years of trouble free service.

NPACKING AND

This unit was thoroughly inspected before leaving the factory and the carrier has accepted and signed for it. Any

damage or irregularities should be noted at the time of delivery and immediately reported to the carrier. Request a

written inspection report from the Claims Inspector to substantiate any necessary claims. In the event that an

immediate replacement is necessary, please contact Cornelius Chiller Sales at 1-800-551-4423.

ESIGN

ATA

The voltage and the frequency are indicated on the serial number plate, located behind the drip tray and on the right

hand side near the controls.

Cooling Capacity:

BTU/hr (W) at 80° F (27° C) and 70° F

(21° C) Liquid Temperature

Compressor Horsepower

Electrical Data:

Voltage/Phase/Hertz/Amperage

Refrigerant Type

Physical Dimensions, Width X Depth X

Height

Fittings:

Process Connections

Optimum Process Liquid Flow GPM

(Liters/Min)

Condenser Air Flow (CFM)