Security Setting - Asus K50AB Hardware User Manual

System BIOS Settings (cont.)
2. Select each item and
press [Enter] to select a
device.

Security Setting

To set the password:
1. On the Security
screen, select Change
Supervisor or Change
User Password.
2. Type in a password
and press [Enter].
3. Re-type to confirm the
password and press
[Enter].
4. Password is then set.
To clear the password:
1. Leave the password field blank and press [Enter].
2. Password is then cleared.
Boot
Boot Device Priority
1st Boot Device [Hard Drive]
2nd Boot Device [CD/DVD]
3rd Boot Device [Removable Device]
4th Boot Device [Network]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Security
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Hard Disk Security Setting
I/O Interface Security
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Appendix
BIOS SETUP UTILITY
BIOS SETUP UTILITY
A
Specifies the boot
sequence from the
availabe devices.
A device enclosed
in parenthesis has
been disabled in the
corresponding type menu.
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Install or Change the
password.
Select Screen
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
A-5