Removing & Installing Body Components
Battery
Negative terminal
Battery holder
Bolt
#
Make sure the ignition switch is in the OFF
position.
Positive terminal
1. Remove the right side cover. 2 P. 51
2. Remove the bolt.
3. Remove the battery holder.
4. Disconnect the negative
5. Disconnect the positive
6. Remove the battery taking care not to drop
#
Install the parts in the reverse order of removal.
Always connect the positive
Battery
Make sure that bolts and nuts are tight.
For proper handling of the battery, see
"Maintenance Fundamentals." 2 P. 36
"Battery Goes Dead." 2 P. 86
Removal
battery.
battery.
the terminal nuts.
Installation
terminal from the
terminal from the
terminal first.
47