Listen To Radio - Boss Audio Systems MGR300B User Manual And Quick Installation Manual

Listen To Radio

You can listen to FM and AM radio, and store the radio stations. The stored radio stations
can be retained if the unit is disconnected from the vehicle battery.
Select a radio band
1.
Press MODE repeatedly to select radio. "FM" or "AM" is displayed.
2.
Press BAND repeatedly to select FM1, FM2, FM3, AM1 or AM2.
Tune to a radio station
1.
Switch the unit to a radio band.
2.
Press briefly
3.
Repeat the steps above until your find your desired station.
To tune to a weak station
1.
Press and hold
2.
Press repeatedly
- Manual tuning mode will automatically exit after three seconds of button inactivity.
Then "AUTO" is displayed briefly.
Store radio stations automatically
Each radio band (FM1/FM2/FM3/AM1/AM2) can store six radio stations.
1.
In radio mode, press BAND to select an FM or AM band.
2.
Press and hold BAND for two seconds to search and store stations.
- All FM or AM stations will be searched and stored in FM or AM bands.
Store radio stations manually
Each radio band (FM1/FM2/FM3/AM1/AM2) can store six radio stations.
1.
Select a radio band and tune to a radio station.
2.
Press and hold
3.
When "SAVE P1" is displayed, rotate the function knob to allocate a number (1-6) to this
radio station. Then press the function knob (or SEL) to confirm.
- If there are three seconds of button inactivity, program mode will automatically exit
without programming the radio station.
4.
Repeat the steps above to store more radio stations.
/ . The unit automatically tunes to a station with strong reception.
/ to enter manual tuning mode. "MANUAL" is displayed briefly.
/ to adjust radio frequency until you find optimal reception.
for two seconds to activate program mode.
8