Get Started; Insert Batteries (Not Included); Set Up The Universal Remote - Philips SRP3011 User Manual

2 Get started

Insert batteries (not included)

Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
•
When you replace the batteries, all user settings will
be retained in the memory of the universal remote for
5 minutes.

Set up the universal remote

You must first set up the universal remote
before operating your device.
EN
4
Manual registration
1
Switch on your device.
2
Press and hold "1" and "6" at the same time
for 5 seconds until the blue LED is on.
3
Look up the 5-digit code for your brand
in the code list. Codes are listed by the
device type and brand name. The most
popular code is listed first.
4
Enter the first 5-digit code using the digit
buttons.