Table of Contents
Advertisement
Switching on the appliance
Press
.
▶
The programme last selected and
the additional function last selec-
ted will be set by default.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
Press the right programme button.
▶
a The programme is set and the pro-
gramme button flashes.
a The remaining running time of the
programme appears on the dis-
play.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 20
a The additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
.
1.
a "h:01" appears in the display.
Use
to set the required start
2.
time for the programme.
Press
.
3.
a This activates timer programming.
Tip: To deactivate timer program-
ming, press
repeatedly until "h:00"
appears in the display.
Starting the programme
Press
.
▶
a The programme has ended when
the display shows "0h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 32
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Tip: To assist the drying, we recom-
mend that the door will be partially
opened after the cycle.
Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Press
for approx. 3 seconds.
▶
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a When the appliance is operated,
flashes on the display.
a The button lock remains activated
with a power failure.
Basic operation aus
31
Advertisement
Table of Contents
