Panel Facilities And Specifications - Pioneer HTV-C1 Service Manual

8. PANEL FACILITIES AND SPECIFICATIONS

Control Center
1 2
SURROUND MODE
STANDBY/ON
1
STANDBY/ON switch
Turns the power ON/OFF (Standby).
Auto Standby Function
The unit is equipped with a function that will automatically turn the
power ON/OFF (Standby) according to the presence or absence of
an input signal.
÷ When the power is ON, the AUTO indicator will be illuminated.
Standby status will automatically be engaged if there is no input
signal for 5 minutes.
÷ If the selected input terminal receives an input signal while the
AUTO indicator is illuminated (Standby status is engaged), the
power will automatically be turned ON.
÷ If power to the unit has been turned OFF (Standby status is
engaged) using the STANDBY/ON button on either the unit or the
remote control, Standby status will remain engaged even if the
selected input terminal receives an input signal.
2 SURROUND MODE button
Selects Surround Mode.
3 DISPLAY button
When pressed once, displays each setting in sequence for 2 sec-
onds; when pressed again, switches to Dimmer Mode, changing the
brightness of the display.
4 VOLUME+, – buttons
5 INPUT button
Selects the input device.
SURROUND MODE
STANDBY/ON
11 12 13 14 15 16
- INPUT indicator
When the INPUT 1 terminal is selected, "1" is illuminated; when the
INPUT 2 terminal is selected, "2" is illuminated.
= ST.WIDE indicator
Lights up when Surround Mode is switched to "STEREO WIDE."
~ DOLBY VIRTUAL indicator
Lights up when Surround Mode is switched to "DOLBY VIRTUAL."
! AUTO indicator
Lights up when Auto Standby status is engaged.
@
Standby indicator
Lights up when the power is OFF (Standby status) . Goes out when
the power is turned ON.
#
ON indicator
Lights up when the power is turned ON. This is the only indicator that
will stay illuminated even when the Display is turned OFF.
$ Character display
VOLUME
DISPLAY INPUT
17 3
VOLUME
DISPLAY
HTV-C1
4 5
INPUT
23