Timer Control - Panasonic CU-FZ25WKE Series Installation Instruction

* The horizontal vane angle tolerance is within +/- 5 degree.
14.4.2 Horizontal Airflow

The horizontal airflow direction louver can be adjusted manually by hand.

14.5 Timer Control


There are 2 sets of ON and OFF timer available to turn the unit ON or OFF at different preset time.

If more than one timer had been set, the upcoming timer will be displayed and will activate in sequence.
14.5.1 ON Timer Control

ON timer 1 and ON timer 2 can be set using remote control, the unit with timer set will start operate earlier than
the setting time.
This is to provide a comfortable environment when reaching the set ON time.

60 minutes before the set time, indoor (at fan speed of Lo-) and outdoor fan motor start operate for 30 seconds to
determine the indoor intake air temperature and outdoor air temperature in order to judge the operation starting
time.

From the above judgment, the decided operation will start operate earlier than the set time as shown below.
14.5.2 OFF Timer Control
OFF timer 1 and OFF timer 2 can be set using remote control, the unit with timer set will stop operate at set time.
Reference point
Side View (Outer Vane)
Closed
Position
Step 1
Step 2
Step 3
Step 4
Step 5
Figure 2
72
Stopper
115º