Start The Programme; Childproof Lock; Adding Laundry; Changing The Programme - Bosch WAE20363IL Series Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Operating the appliance
en
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.

Start the programme

Select the Start/Reload button. The
indicator lamp lights up and the
programme starts.
During the programme, the display
panel shows the "Finished in" time or,
after starting the wash programme, the
programme duration and the symbols
for the programme progress.
~ Page 9
If you want to lock the
Note:
programme to prevent it from being
inadvertently adjusted, you can select
the childproof lock as follows.

Childproof lock

You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock after starting
the programme.
To activate/deactivate the childproof
lock, press and hold "Start/Reload" for
approx. five seconds. The E symbol
appears on the display panel.
E lights up: The childproof lock is
active.
E flashes: The childproof lock is
active and the programme selector
has been adjusted. To prevent the
programme from stopping, turn the
programme selector back to the
original programme. The symbol
lights up again.
The childproof lock can remain
Note:
activated until you wish to start the next
programme, even after switching off the
machine.
You must then deactivate the childproof
lock before starting the programme and
18
activate it again as necessary once the
programme has started.

Adding laundry

After starting the programme, you can
add or remove laundry as required.
To do this, press the Start/Reload
button.
The "Start/Reload" indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Do not leave the washing
Note:
machine door open for too long when
adding laundry as water from the
laundry may leak out.
If, on the display panel:
YES lights up, it is possible to add
laundry.
NO flashes, wait until YES lights up.
A flashing NO symbol, it is not
possible to add laundry.
For safety reasons, the washing
machine door remains locked when
the water level or temperature is
high, or while the drum is rotating,
and it is not possible to add laundry.
To continue the programme, press
the Start/Reload button. The
programme continues automatically.

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:
Select the other programme.
1.
Press the Start/Reload button. The
2.
new programme starts from the
beginning.

Advertisement

Table of Contents
loading

Table of Contents