Table of Contents
Advertisement
9.6.
The
Application
Method
The grease application parts of lens unit are as follows.
Apply grease additionally in the specified position if necessary.
When the grease is applied, use a toothpick and apply thinly.
• Focus motor nut sliding part
- Grease: RFKZ0472
- Amount of application: 1 - 1.6 mg (2 points)
• 4th Lens Frame swing guard part
- Grease: RFKZ0472
- Amount of application: 0.1 - 0.5 mg (2 points)
• Lead screw
- Grease: RFKZ0472
- Amount of application: 2 - 4 mg
• 4th Lens Frame spindle guide
- Grease: RFKZ0472
- Amount of application: 0.7 - 1.1 mg (2 points)
of
Grease
33
Advertisement
Table of Contents
