Led Flashlight - Telefunken TF-JS02 Instruction Manual

In the event of a short circuit, the fuse will
blow to prevent possible fire. In this case,
immediately discontinue use of the device and
contact an authorized service center for
repair.
After starting the engine, disconnect the
device, remove the plug from the input socket,
disconnect the connection clip from the
battery.
Operating as a backup power
source
Besides its main purpose, the device can be
used to power most portable electronics -
laptops, telephones, photo and video
cameras, etc. We draw your attention to the
fact that different devices consume different
voltages (for example, laptops are often 19 V).
Carefully study the characteristics of your
portable device and make sure that you have
correctly selected the voltage before
connecting to the battery.
Laptop charging
Select the adapter for the laptop from
the included set.
Connect the laptop charger cable to the
device.
You can use the laptop while charging.
Instruction manual
Charging other portable
devices via USB port
Connect using a USB cable.
Turn on the device.
When the portable device is charged,
remove the plug first from the jump
starter, then from the portable
electronic device.

LED flashlight

To turn on the LED flashlight, press and
hold the lighting mode button for 3
seconds. The flashlight has several
modes of operation: Normal / Flashing /
SOS. Press the lighting mode button
shortly to change the mode. Press and
hold this button in any mode to switch the
flashlight off.
5