Related Manuals for Makita 4200N
Summary of Contents for Makita 4200N
- Page 1 Circular Saw MODEL 4200N 005493 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
SPECIFICATIONS Model 4200N Blade diameter 110 mm at 90° 32 mm Max. Cutting depth at 45° 21 mm 11,000 No load speed (min Overall length 230 mm Net weight 2.8 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories. -
Page 4: Additional Safety Rules For Tool
ADDITIONAL SAFETY RULES FOR TOOL ENB036-4 Wear hearing protection. Use Rip Fence. Always use a fence or straight edge guide when Keep Guards In Place and In Working Order. ripping. Never wedge or tie lower guard open. Check operation of lower guard before each use. 10. - Page 5 control which could cause personal injury. Fig. 4 illustrates typical hand support of the saw. Fig. 6 17. Never attempt to saw with the circular saw held upside down in a vise. This is extremely danger- Fig. 4 ous and can lead to serious accidents. (Fig. 7) A typical illustration of proper hand support, workpiece support, and supply cord routing.
-
Page 6: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting depth of cut 001337 CAUTION: • After adjusting the depth of cut, always tighten the clamping screw securely. - Page 7 • Use only the Makita wrench to install or remove the blade. To remove the blade, hold the outer flange with the wrench so that it cannot revolve, then use the socket wrench to loosen the hex bolt clockwise. Then remove the hex bolt, outer flange and blade.
-
Page 8: Maintenance
Rip fence (Guide rule) 005513 The handy rip fence allows you to do extra-accurate straight cuts. Simply slide the rip fence up snugly against the side of the workpiece and secure it in posi- tion with the screw on the front of the base. It also makes repeated cuts of uni- form width possible. - Page 9 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Makita Corporation 883136D8...