Panasonic NA-128VG6 Operating & Installation Instructions Manual page 38

Connecting the Hoses
Water supply hose
Water pressure: 0.03-1 MPa
If the water pressure exceeds this
more
Connecting the water supply hose
cut the hose.
1 Attach one end of the hose to the
water inlet on the appliance and
tighten by hand.
2 Attach the other end of the hose to
the tap and tighten by hand.
min.
10 mm
3/4"
3 Turn on the tap slowly and make
sure there are no leaks.
38
CAUTION
(Rear of appliance)
Water inlet
Water supply
hose
Water
supply hose
(continued)
Drain hose
Draining to a sink or wash basin
CAUTION
Secure the drain hose with an elbow
so that it does not come off by water
pressure during drainage.
Elbow
(supplied)
Draining to a stand pipe
Stand pipe
Draining to a drain hole
NOTE
Do not twist, pull out or bend the
drain hose.
Do not put the hose tip under water.