GE AEE08 Owner's Manual & Installation Instructions page 10

Installation Instructions
4. INSTALL THE BOTTOM CASE
SEAL
Peel the backing from the bottom case seal and attach
it along the bottom of the case in front of the bottom
mounting rail.
Bottom
mounting rail
5. INSTALL THE TOP MOUNTING
RAIL ONTO THE CASE
Attach the top mounting rail onto the top of the case
with 3 Type B screws.
Press firmly to drive the screws into the gasket and
through the top mounting rail.
10
Bottom case seal
Type B
screws
Top
mounting
rail
6. INSTALL THE SIDE
ACCORDION PANELS
A. Slide the left and right accordion panels into the
top and bottom mounting rails.
B. Attach the accordion panels to the case using 3
Type A screws on each side.
Accordion
panel
Type A
screws
BACK
Top mounting rail
Bottom mounting rail
49-5000550 Rev. 0