Circulating-air mode ................5 Operating the appliance ............6 Additional information on products, accessories, replacement Setting the fan ..................6 parts and services can be found at www.bosch-home.com and Lighting ....................6 in the online shop www.bosch-eshop.com Cleaning and maintenance ............6 : Important safety information Read these instructions carefully.
Page 4
In combination with an activated vapour Hot oil and fat can ignite very quickly. ■ extractor hood, room air is extracted from Never leave hot fat or oil unattended. the kitchen and neighbouring rooms - a Never use water to put out burning oil or partial vacuum is produced if not enough fat.
Causes of damage Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Always replace faulty bulbs to prevent the remaining bulbs from overloading. Risk of damage due to ingress of humidity into the electronic circuitry.
Operating the appliance Setting the fan These instructions apply to several appliance variants. It is possible that individual features are described which do not Note: Always adjust the fan strength to meet current conditions. apply to your appliance. If there is a large build-up of steam or fumes, select a high fan Note: Switch on the extractor hood when you start cooking and setting.
Page 7
Cleaning the metal mesh grease filters Installing the metal mesh grease filter These instructions apply to several appliance variants. It is Insert the metal mesh grease filter. possible that individual features are described which do not While doing this, place the other hand under the metal mesh apply to your appliance.
Trouble shooting Replacing bulbs Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. Risk of electric shock! Risk of electric shock! When changing the bulbs, the bulb socket contacts are live. Incorrect repairs are dangerous. Repairs may only be carried Before changing the bulb, unplug the appliance from the mains out and damaged power cables replaced by one of our trained or switch off the circuit breaker in the fuse box.