Table of Contents
Advertisement
Maintenance
properly.
1 Turn off the tap.
2 Turn on the power and start the
"Cotton" programme without any
laundry or detergent inside the
drum.
3 After 1 minute, turn off the power.
Water has drained out of the water
supply hose.
4 Remove the water supply hose and
Brush etc.
Water supply
If the water supply hose is frozen
1 Wrap warm towels around the joints
of the water supply hose.
Joints
2 Put 2 to 3 litres of hot water (about
50 °C) into the drum.
3 Wait for about 10 minutes, select
and run the spin process in "Mode"
function (P. 24).
Water
supply hose
27
Advertisement
Chapters
Table of Contents
