Oregon Scientific TH511 Quick Start Manual

5-grade brightness
Dimmable
>1500LUX(30cm)
Max luminous(30cm)
Luminous flux
>500LM
Working voltage
12V
Color temperature
Cold light 5500K±500K
Warm light 3000K±280K
Natural light 4200K±400K
Max wattage
± W
12W 1
1/pc Cell battery
Tap and pushdown to open
the battery cover
The screen will light automatically
once connect electric, default
brightness is the highest .
The screen brightness controller key,
brightness will change from weak
brightness-middle brightness-high
brightness-off(cycle)
Do not disassemble the product to avoid electrical shock.
Please use vender's specified adapter and power socket, to maintain
normal working.
Please do not over-adjust the joint activity parts, to avoid any
damage to the lamp.
Please do not use the lamp in high-temperature or high-humidity
environment.
Please do not look at the LED lightsouce straightly, to avoid your
eyes hurt.
Please disconnect the product if the conditions listed below
occur:
The power cord or power plug break
The lamp holder damp or rain
The shell and joint activities of the lamp holder breaks
The lamp holder smokes or sparks
The abnormal flickering or break of the LED light bulb
EU Declaration of Conformity
Hereby, the manufacturer Oregon Scientific, declares that the
equipment type: Color Changing Mood LED Lamp (model:TH511)
is in compliance with the Directive 2014/30/EU.The full text of the EU
declaration of conformity is available at the following Internet address
www.oregonscientific.it
Connect the power adapter in
the rear of the lamp arm .
Touch buttons, touch dimmer
(please refer to the instructions on
the use keys) " "
Lighting area:
Adjustable angle of the lamp stand:90
When adjusting the lamp arm,
please hold the base
The lamps arm and chimney activities:
When adjusting the lamp arm,
please hold the base
Arm adjustable range:180
(excessive adjustment may cause damage)
When adjusting the chimney,
please mind the joint-part to avoid clipping hands
T H511
Color Changing Mood LED Lamp
Touch key:Light adjustable instruction (aspicture below)
Lamp switch Cold light increase brightness decrease brightness
(as picture below)
Nightlight button operation
Press one second nightlight on or off, press three seconds colorful gradient cycle
Turn on the state of optionally substituted on the the color bar colors can be fixed color Steady
Calendar operation instruction:(as below picture)
Date and Time setting
In normal mode,press "set" key to achieve setting functions,press
again to move next,sequence:
Hour-Minute-Year-Month-Day.
2.Press "up" and "down" to setting.
In setting mode,press mode or stop operation for one munite to exit
setting and display time. ,
4. In normal mode,press "up" key to switch between
display.
Snooze function setting
In normal mode, press mode" key to active alarm setting. "
In alarm mode, press set" key to set the alarm time,sequence: "
Hour- Minute -Snooze-Music-Exit.
" " " "
3. Press up and down to turn on/off alarm and press again to achieve next
function,sequence:
alarm on-snooze on-alarm off-snooze off.
4.When come to alarm time, alarm will sound for one minute and sound again.
Press any key to turn it off.
Temperature switch
In normal mode, press " down" key to switch
b etween F" and C" display. " "
"12H" or "24H"