Table of Contents
Advertisement
Connections to other equipment
Using an AV Amplifier with built-in digital surround
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy broadcast
or cable programs that provide Dolby Digital sound.
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.
To DIGITAL AUDIO OUT
(COAxIAL)
Coaxial cable
(not supplied)
To Coaxial
Digital Audio Input
AV Amplifier with built-in digital surround decoder
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF
yOUR PC'S RESOLUTIOn AnD REFRESh RATE (60 hz).
Connect one end of a (male to male) VGA cable to the video terminal of the computer and
the other end to the PC IN on the rear of the TV. Attach the connectors firmly with the screws
on the plug. In case of a Multimedia computer, connect the audio cable to the audio output
of your Multimedia computer and to the AV Audio input on the rear of the TV. You can also
connect the PC with HDMI cable. If you use HDMI cable, you don't have to connect the
audio cable. If you use DVI-to-HDMI cable, please connect audio cable as same way as
VGA cable. Press INPUT on the remote control to select PC Input. Switch on the computer.
The TV can operate as the computer monitor.
Bottom of the TV
VGA
To AV AUDIO Input
Audio cable (not supplied)
To PC IN
VGA cable (not supplied)
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, "Weak or No Signal" will appear on the TV-screen.
• When the PC's resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal, which has been
confirmed operational on this TV, may appear depending on the PC used. In this case, "Auto Adjust" or other position adjustment
functions may fail to correct the image position. To solve this problem, change the PC settings to select another resolution.
Front
Speaker
(Left)
Center Speaker
Surround
Speaker
(Left)
Monitor Display modes
Mode
VGA
VGA
SVGA
xGA
WxGA
WxGA
SxGA
WxGA+
WSxGA+
FHD
(continued)
Front
Speaker
TV
(Right)
Subwoofer
Surround
Speaker
(Right)
Resolution
Refresh rate
640x480
60/ 75 Hz
720x400
70Hz
800x600
60/ 75 Hz
1024x768
60/ 70/ 75 Hz
1280x720
60Hz
1360x768
60Hz
1280x1024
60Hz
1440x900
60Hz
1680x1050
60Hz
1920x1080
60Hz
33
Advertisement
Table of Contents
