Download Print this page

Advertisement

Quick Links

halsted
steel wicker club chair
style # FRS80712E-C1/C2/C3/C4/C5
dpci # 009005412/5419/5426/8305/8314
>>assembly instructions
TM

Advertisement

loading

Summary of Contents for YOTRIO Target halsted FRS80712E-C1

  • Page 1 halsted steel wicker club chair style # FRS80712E-C1/C2/C3/C4/C5 dpci # 009005412/5419/5426/8305/8314 >>assembly instructions...
  • Page 2: Important Warning

    Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. Good luck –...
  • Page 3: Warranty

    Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday. Code: Yotrio 2018 before you begin 1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
  • Page 4 table of contents introduction hardware parts list assembly 7-10 QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) parts and service. For faster service, have th e style number and DPCI number r eady when calling.
  • Page 5 hardware (Part D)×2 (Part E)×1 (Part C)×2 washer M6*30mm screw allen wrench...
  • Page 6: Description Quantity

    ITEM DESCRIPTION QUANTITY chair back chair seat...
  • Page 7 step 01: ATTENTION: To avoid damage to your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly. 1. Insert the chair back (A) to the pin on the chair seat (B).
  • Page 8 step 02 : (Part D)×1 (Part E)×1 (Part C)×1 washer M6*30 mm screw allen wrench 1. Line up screw hole on the left armrest of the chair seat (B) corresponding screw hole Secure with M6*30mm screw (C) and washer (D) using allen wrench (E).
  • Page 9 step 03 : (Part C)×1 (Part D)×1 (Part E)×1 washer M6*30 mm screw allen wrench 1. Line up screw hole on the right armrest of the chair seat (B) with corresponding screw hole Secure with M6*30mm screw (C) and washer (D) using allen wrench (E).
  • Page 10 step 04 : 1. Tighten all the screws. 2. urn chair to upright position. cushions on the chair. You are now ready to enjoy your new chair.
  • Page 12 2018 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.