Midi Settings; Transferring Data Between The Digital Keyboard And A Computer - Casio CT-X9000IN User Manual

Connecting a Computer

MIDI Settings

Keyboard Channel
This parameter specifies the channel to be used when
keyboard performance information is sent from this Digital
Keyboard to a computer.
Perform the procedure under "To configure function settings
with the bk FUNCTION button" (page EN-107) and configure
the following setting: Keyboard Channel (Keybd Ch) (page
EN-112).
Local Control
This parameter can be used when using an external sound
source to play Digital Keyboard notes to specify that the notes
should not be sounded by the Digital Keyboard.
Perform the procedure under "To configure function settings
with the bk FUNCTION button" (page EN-107) and configure
the following setting: Local Control (Local) (page EN-112).
Accomp Out
This parameter specifies whether or not Auto Accompaniment
data should be sent.
Perform the procedure under "To configure function settings
with the bk FUNCTION button" (page EN-107) and configure
the following setting: Accomp Out (AcompOut) (page
EN-112).
Transferring Data Between the
Digital Keyboard and a Computer
You can transfer recorded songs, and other data in Digital
Keyboard memory to a computer for storage. You also can
load Auto Accompaniment data you download from the
CASIO website to the Digital Keyboard, which greatly
expands Auto Accompaniment patterns available to you. A
special Data Manager application is required in order to
transfer data to and from the Digital Keyboard.
Data Types Supported for Data Transfer
You can transfer the types of data listed below between the
Digital Keyboard and a computer.
• User tone data (page EN-69)
• User rhythm data (page EN-74)
• User-recorded songs (page EN-87)
• Registration (bank unit) (page EN-65)
• User Phrase (phrase set unit) (page EN-53)
EN-120
Downloading Data Manager
1.
Go to the CASIO WORLDWIDE site at the
following URL.
http://world.casio.com/
2.
At the site, select a geographic area or country.
3.
After accessing the area site, navigate to the
minimum computer system requirements for
Data Manager for this product.
• You should be able to find a link to Data Manager
information on the product introduction page of this
product. If you cannot find such a link, use the search
form of the area site where you are located to enter the
model name of this product and search for it.
• Note that site contents are subject to change without
notice.
4.
Check if your computer system complies with
the minimum requirements for Data Manager.
5.
Download Data Manager and its user's guide to
your computer.
6.
Follow the procedure in the user's guide that
you downloaded in step 5 to install and use
Data Manager.
• You can download accompaniment data from the
Internet Data Expansion system of the CASIO MUSIC
SITE (http://music.casio.com/) and load it into the
memory of this Digital Keyboard. Note that there is not
any accompaniment data intended specifically for this
model, so you should use data for other models.
• Since the accompaniment data is for other models, you
may experience some abnormalities when playing it on this
model.
• For information about accompaniment data compatibility
between models, see the Data Manager user's guide you
download in step 5 of the above procedure.