Siemens SN61IX09TE User Manual page 35

Hide thumbs Also See for SN61IX09TE:
Table of Contents

Advertisement

Setting Extra Dry
Press
⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
LEDs show the right value.
If LED A → Page 16 is not lit, Extra
Dry is switched off.
If LED A → Page 16 is lit, Extra Dry
is switched on.
To save the settings, press
5.
for 3 seconds.
Setting signal volume
Press
⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 (LED
A and LED B → Page 16).
To save the settings, press
5.
for 3 seconds.
Set Wi-Fi
Press
⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
LEDs show the right value.
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
If LED A → Page 16 is not lit, the
wireless network connection is
switched off.
If LED A → Page 16 is lit, the wire-
less network connection is
switched on.
To save the settings, press
5.
for 3 seconds.
Set remote start
Press
⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
flashes in the display.
Press
repeatedly until the
4.
LEDs show the right value.
If LED A is lit, remote start is per-
manently deactivated.
If LED A and B LED are lit, remote
start can be selected via the re-
mote start button.
If LED A, LED B and LED C are lit,
remote start is permanently activ-
ated.
The factory setting is level 2 (LED
A and LED B → Page 16).
To save the settings, press
5.
for 3 seconds.
Restoring factory settings
Press
⁠ .
1.
To open the appliance settings,
2.
press
flashes in the display.
a
Press
3.
and
flash in the display.
Press
to set the appliance
4.
back to the factory settings.
a The appliance is reset.
Basic settings en
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
,
35

Advertisement

Table of Contents
loading

Table of Contents