SCHEMATIC DIAGRAM(MAIN for AU,SS)
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol
! ! !
in the
parts list and the schematic diagram designated components in which safety can be of special significance. When
replacing a component identified by
! ! !
, use only the replacement parts designated, or parts with the same ratings of
resistance, wattage or voltage that are designated in the parts list in this manual. Leakage-current or resistance
measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before
returning the product to the customer.
This is a basic schematic diagram.
- 72 -
- 73 -