3-Stage Setting; Auto Cook Setting - Panasonic NN-DS596B Manual

3-Stage Setting

This feature allows you to program 3-Stage continually.
E.g.: Continually set [600 W] 2 minutes, [Steam 2] 3 minutes and [Grill 2] 2 minutes.
1.Press once, then " 2. Set desired power level
" symbol appears (600 W) by using the dial.
in the display.
8.Set desired power level 7.Press once to verify
(Steam 2) by using the your selection.
dial.
9. Press once to verify 10.Set desired cooking
your selection. time (3 minutes) by
using the dial.
16.Set desired cooking time 15.Press once to verify
(2 minutes) by using the your selection.
dial.
Notes:
1. When operating, two beeps will sound between each stage.
2. This feature is only available for Combination, Grill, Timer,
Microwave, Steam function.
17.Press Start pad.
3. Auto programs can not be used with 3-stages cooking.
The time will count down
4. Steam, Steam + Grill and Steam + Microwave function can not be
at the first stage in the
used over 30 minutes in this feature.
display window.
3.Press once to verify 4. Set desired cooking
your selection. time (2 minutes) by
using the dial.
6.Turning the dial anti- 5.Press once to verify
clockwise until the your selection and
" " symbol appears in starts to setting the
the display. stage cooking.
11.Press once to verify
12.Turning the dial anti-
your selection and
clockwise until the
starts to setting the
" " symbol appears
stage cooking.
in the display.
14.Set desired power level 13.Press once to verify
(Grill 2) by using the dial. your selection.
– 40 –
Auto Cook Setting (Method 1)
This feature allows you to cook most of your favourite foods by setting the weight only. The oven determines the
power setting, then the cooking time automatically. Select the category of food and then just enter the weight. Do
not include the weight of any added water or the container weight.
For menus No. 1 - No.22, please operate as follows:
Without Preheating:
1
Select Auto Cook Menu.
Turning the dial clockwise until the desired Auto Cook Menu Number appears in the display.
2
Press .
Press once to verify your selection.
3
Set Serving/Weight.
Set serving/weight by using the dial.
4
Press
Press Start pad. The cooking time appears in the display window and begins to count down.
Notes:
When you select an automatic program, auto cook menu number and symbols (as shown below) will appear in
the display.
indicates the Wire Rack or Grill Tray should be used during cooking and placement of them.
*
indicates healthy menu.
*
– 41 –