Advertisement
5. Place Car Seat Rear-Facing in Back
Seat of the Vehicle
Place rear-facing in vehicle seat and center
the car seat between the lower anchors. The
base should sit as flat as possible on the
vehicle seat.
Note: Make Sure Base is a minimum of
80% on Vehicle Seat.
6. Extend the Lower Anchor Strap
For easier installation, extend the lower
anchor strap to its maximum length by
pressing the grey button and pulling on the
strap.
7. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat.
The bubble must be completely within
the blue zone.
Adjust the recline until the bubble is
completely within the blue zone.
40
Advertisement
