Scanning An Original - Sharp MX-2651 Quick Start Manual

SCANNING AN ORIGINAL

The basic operation for scanning is explained below.
The procedure for sending a scanned file by E-mail to a destination stored in the address book is explained here.
1
2
CLOUD PORTAL
Bk
C
Toner Quantity
M
Operation Enlarge
Y
Guide Display Mode
3
4 Original
Address E-mail Address
A4
Address Book
CA
Preview
5
Address
AAA AAA
BBB BBB
CCC CCC
DDD DDD
EEE EEE
FFF FFF
Category
Frequent
All
Use
Easy Easy
Easy
Copy Scan
Fax
Operation Enlarge Settings Total Count Brightness
Settings Total Count Brightness Job Status
Guide Display Mode Adjustment
Adjustment
Global Scan to HDD/
Sending History
Address Search USB
B/W
Auto Set
Start
Sort
Scan to HDD/
USB
B/W
Start
Press the [Home Screen] key.
Home screen appears.
Tap the [Easy Scan] mode icon.
10:15
Easy Scan mode screen appears.
Job Status
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► PLACING ORIGINALS (page 18)
Tap the [Address Book] key.
Detail
Colour
Start
Tap the key of the desired destination.
CA
Addresses of the current mode are selected from addresses
whose checkboxes were selected when the tapped
destination was registered. If no addresses were registered
with the checkbox selected, tap the [Yes] key in the
confirmation screen and select the desired addresses.
To add another destination, tap the key of the destination.
Colour
Start
SCANNER
49