Chapter 2 Utility Stitches; Basic Stitching; Basting - Brother Innov-is NV1100 Operation Manual

Basic Stitching

2
Chapter
Basic Stitching
Straight stitches are used for sewing plain seams.
• Using the table below, refer to "Using the utility
stitch tables in the "Sewing" section" in the "Basic
operations" section.
Stitch name Stitch
Basting stitch
Straight stitch (Left)
Straight stitch (Middle)
Straight stitch (Middle)
Triple stretch stitch
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to "Basic operations" section.

Basting

When using Model 1: Sew basting with a stitch length of
5 mm (3/16 inch).
When using Model 2 or 3: Sew basting with a stitch length
between 5 mm (3/16 inch) and 30 mm (1-3/16 inches).
a Attach zigzag foot "J".
b Select stitch .
c Start sewing.
S-6
UTILITY STITCHES
Stitch number
1-08 08 07
* *
1-01 01 01
* *
1-02 02 02
J
* *
1-03
03 03
04* 04*
1-04
* *
1-05 05 05
J
Basic stitching
a Baste or pin together the fabric pieces.
b Attach zigzag foot "J".
c Select a stitch.
d Lower the needle into the fabric at the beginning of the
stitching.
Lower the presser foot lever, and then start sewing.
e
When sewing is finished, cut the thread.
f
J