Statistics; Wps - TP-Link PW-DN427 User Manual

Wireless lite-n usb adapter

Table of Contents

Apply - Click the Apply button to save the current setting.

3.1.4 Statistics

Click the Statistics tab of the Utility and you will see the following screen displaying the receiving

and transmitting statistical information. Click the Reset Counter button to reset the count of the

statistics information.

Click the WPS tab of the Utility and you can configure the WPS function to joint an existing

network quickly in the following screen.

The WPS connection will be automatically displayed on the WPS Profile List. Pitch on the

Profile and click Export Profile to add a Profile to the Profile List (Section 3.1.1).

The Auto function is default to enable that the adapter will automatically try to build the

connection with the Access Point devices shown in the WPS AP List one by one.

You can also establish a wireless connection by using either Push WPS Button method or

PIN method. It is recommended that you choose the simplest method that your AP device

PW-DN427

Wireless Lite-N USB Adapter User Guide

Figure 3-7 Statistics tab

Figure 3-8 WPS tab

- 14 -

Table of Contents