Open Source Software Notice Information; Smart Diagnosis™ Through The Customer Information Centre - LG GBB940DFQZT Owner's Manual

Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com. In addition to the
source code, all referred license terms, warranty
disclaimers and copyright notices are available
for download. LG Electronics will also provide
open source code to you on CD-ROM for a
charge covering the cost of performing such
distribution (such as the cost of media, shipping,
and handling) upon email request to
opensource@lge.com. This offer is valid for a
period of three years after our last shipment of t
his product. This offer is valid to anyone in receipt
of this information.
Smart Diagnosis™ Through the
Customer Information Centre
For appliances with the
•
Use this function if you need an accurate diagnosis
by an LG Electronics customer information center
when the appliance malfunctions or fails. Use this
function only to contact the service representative,
not during normal operation.
1
Close the refrigerator compartment door, push
«Lock Hold 3sec.» button and hold it for 3
seconds until lock function activation, then push
the freezer compartment temperature control button
and hold it for 3 seconds, then open the refrigerator
compartment door.
*If the display has been locked for over 5 minutes,
you must deactivate the lock and then reactivate it.
2
Following the operator's instructions, bring
the microphone of your phone as close to
the SmartDiagnosis sign as possible. Hold
your phone in this position until the data
transfer is complete.
18
or logo
3
The Customer Support Center operator
may ask you to repeat the data transfer if
operator considers the results corrupted or
incomplete.
4
In order to cease transmitting data and
turn off SmartDiagnosis™, push Lock
button and Freezer Temperature Control
buttons.
5
As soon as the transfer is complete, you
can continue the conversation with the
operator, who will send the information to
technical support for analysis.
NOTE
• Position the phone so that its microphone is
aligned with the speaker hole.
• The Smart Diagnosis™ sound is generated
after around 3 seconds.
• Do not take the phone o ff the speak hole
while the data is transmitted.
• Hold the phone on the upper right speaker
hole and wait while the data is transmitted.
• The data transfer sound may be harsh to the
ear while the Smart Diagnosis™ data is being
transmitted, but do not take the phone o ff the
speaker hole fo r accurate diagnosis until the
data transfer sound has stopped.
• The Smart Diagnosis™ function depends on the
local call quality. .
• The Smart Diagnosis™ function cannot
be used if the refrigerator is not plugged in.
• If the Smart Diagnosis™ data transfer is
poor due to poor call quality, you may not
receive the best Smart Diagnosis™ service.
EN