Hisense AVW-48UESC Installation & Maintenance Manual page 16

G Cap the end of the pipe when the pipe is to
be inserted through a hole.
G Do not put pipes on the ground directly
without a cap or vinyl tape at the end of the
pipe.
G Flaring Dimension
Perform the flaring work as shown below.
G Piping Thickness and Material
Use the pipe as below.
Diameter
Thickness
Material is based on a JIS standard (JIS B8607).
G Flare Nut Dimension
Use the flare nut as below.
<Flare Nut Dimension B
Diameter R410A
Dimension is based on a JIS standard
(JIS B8607).
(unit:mm)
Diameter
(unit:mm)
Material
(unit:mm)
Flare Nut
8