Table of Contents
Advertisement
5.
Data Initialize
Refer to "3. Starting Adjustment Program (MAP)" in advance, then start MAP and display the main menu on PC display.
If error message appears on PC display during adjustment, perform troubleshooting, referring to "10. Error Messages".
Essential note:
After completing this adjustment, be sure to perform all adjustment
items.
Caution:
This procedure initializes the data in EEPROM (including the
adjustment data). Any time you replace EEPROM or the board
containing EEPROM, be sure to perform this procedure. (Generally,
this procedure is not necessary after replacing components.)
Procedure:
1) Input A to PC on the main menu screen to display the Initialize screen.
2) Input Y to PC. (*1)
3) Follow the instructions on PC display thereafter. (The setting is complete
when the main menu screen is restored.)
*1: Entering N on the Initialize screen will restore the main menu screen.
6.
Camera Adjustment
Refer to "3. Starting Adjustment Program (MAP)" in advance, start MAP and
display the main menu on PC display. If error message appears on PC display
during adjustment, perform troubleshooting, referring to "10. Error Messages".
Before starting:
1) Input B to PC on the main menu screen to display the camera
adjustment menu screen.
2) Input to PC the appropriate adjustment number. (*1)
*1: Pressing the Esc key on the camera adjustment menu screen will restore
the main menu screen.
Note: The B matrix adjustment applies only to the following models:
The adjustment name will appear on the camera adjustment menu
screen only for models that need this adjustment.
DZ-MV200A/MV200A(K)
DZ-MV208E(AU)/MV208E(SW)
DZ-MV200E/MV200E(UK)
Main menu screen
***********************************************************
MANUAL ADJUSTMENT PROGRAM
***********************************************************
[A]
DATA INITIALIZE
[B]
CAMERA ADJUSTMENT
[C]
AUTO FOCUS
[D]
STABILIZER
[E]
SPOT NOISE
[ESC] END
Please select [A] - [E] or [ESC]
Input A to PC.
Initialize screen
<< DATA WRITING >>
START TO SEND DATA. (Y/N)
Input Y to PC.
Follow the instructions on PC display
thereafter. (The setting is complete when
the main menu screen is restored.)
Main menu screen
***********************************************************
MANUAL ADJUSTMENT PROGRAM
***********************************************************
[A]
DATA INITIALIZE
[B]
CAMERA ADJUSTMENT
[C]
AUTO FOCUS
[D]
STABILIZER
[E]
SPOT NOISE
[ESC] END
Please select [A] - [E] or [ESC]
Input B to PC.
Camera adjustment menu screen
***********************************************************
CAMERA ADJUSTMENT
***********************************************************
[1]
SAMPLING PULSE
[2]
AUTO IRIS CONTROL
[3]
SHUTTER
[4]
B MATRIX
[5]
WHITE BALANCE
[6]
CHROMA GAIN
[ESC] RETURN TO MAIN MENU
Please select [1] - [6] or [ESC]
3 - 15
Advertisement
Table of Contents
