1MRK 511 445-UEN B
Section 9
9.1
IED identifiers TERMINALID
9.1.1
Application
IED identifiers (TERMINALID) function allows the user to identify the individual IED in the
system, not only in the substation, but in a whole region or a country.
9.2
Product information PRODINF
9.2.1
Application
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/Diagnostics/IED
status/Product identifiers and under Main menu/Diagnostics/IED Status/Identifiers.
•
ProductVer
•
ProductDef
•
FirmwareVer
•
SerialNo
•
ProductType
The IED information can be retrieved through PCM600 as well, under Properties window/IED
summary, refer to Figure 14.
Switchgear control unit SAM600-IO
Application manual
Basic IED functions
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
In order to get the following information in SAM600-IO, the service kit is
needed. For more information on service kit, refer
manual .
© Copyright 2017 ABB. All rights reserved
Section 9
Basic IED functions
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v9
SAM600-IO Technical
IP15060-1 v2
M15324-3 v6
67