Description Of The Washer Dryer; Control Panel - Hotpoint Ariston ARMXXD 109 Instructions For Use Manual

Description of the washer dryer

Control panel

GB
Detergent dispenser drawer: used to dispense
detergents and washing additives (see “Detergents
and laundry”).
ON/OFF button
machine on or off. The START/PAUSE indicator light,
which flashes slowly in a green colour shows that the
machine is switched on. To switch off the washer
dryer during the wash cycle, press and hold the
button for approximately 2 seconds; if the button is
pressed briefly or accidentally the machine will not
switch off. If the machine is switched off during a
wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR buttons: used to set the
desired wash cycle (see "Table of wash cycles").
MEMORY button: press and hold the button to store
a cycle with your own set of preferences in the
memory of the machine. To recall a previously stored
cycle, press the MEMO button.
FUNCTION buttons: press the button to select the
desired function. The corresponding indicator light on
the display will switch on.
SPIN button : press to reduce or completely
exclude the spin cycle - the value is indicated on the
display.
4
Detergent dispenser
drawer
SELECTOR
: press this briefly to switch the
ON/OFF
DRYING
button
Button
MEMORY
Button
WASH
CYCLE
DELAYED
Buttons
START
Button
TEMPERATURE button
temperature: the value will be shown on the display.
CONTROL PANEL LOCK button
control panel lock, press and hold the button for
approximately 2 seconds. When the symbol
illuminated, the control panel is locked. This means it
is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the
home. To deactivate the control panel lock, press
and hold the button for approximately 2 seconds.
DELAYED START button
start time for the selected wash cycle. The delay time
will be shown on the display.
DRYING button
START/PAUSE button with indicator light: when the
green indicator light flashes slowly, press the button to
start a wash cycle. Once the cycle has begun the
indicator light will remain lit in a fixed manner. To
pause the wash cycle, press the button again; the
indicator light will flash in an orange colour. If the
symbol is not illuminated, the door may be
opened. To start the wash cycle from the point at
which it was interrupted, press the button again.
CONTROL PANEL
LOCK
button
SPIN SPEED
Button
DISPLAY
START/
PAUSE
FUNCTION
button with
buttons
indicator light
TEMPERATURE
Button
: press to decrease the
: to activate the
: press to set a delayed
: press to set a drying cycle.
is