Assembly Instructions - Kawai KDP70 Owner's Manual

Assembly Instructions

Please read these assembly instructions thoroughly before attempting to assemble the KDP70 digital piano.
Please ensure that two or more people work on assembling the KDP70 digital piano, especially when lifting
the main body of the instrument onto the stand in step 3.
 Included parts
Before attempting to assemble the KDP70 digital piano, ensure that all parts below are included.
A Phillips-head screwdriver (not included) will also be required in order to assemble the instrument.
a Main body
d Pedal board
Pedal support bolt
Screw set
g Screw (with flat washer and spring washer) x 4
h Tapping screw (long, black, 4 x 30 mm) x 2 *
i Tapping screw (short, black, 4 x 20 mm) x 4 *
j Tapping screw (silver, 4 x 16 mm) x 4
* For Satin White finished instruments, black screws will be
replaced with silver screws.
b Side panel
(left, right)
e AC/DC Adaptor
k Headphone hook set x 1
Headphone hook x 1
c Back board
f Power cable
Mounting screw x 2
43