Edimax BR-6641 User Manual page 19

4wan+1lan load balancer router

Hide thumbs Also See for BR-6641:

Table of Contents

Push Test button to begin the test. The result of the test is one of the following:

Everything is ok.

BR-6641 discovers that a machine in DMZ conflicts with Network Setting on

BR-6641. For example, a public IP address should be in WAN but is used by

a machine in DMZ. An error message with the conflicting IP address and

MAC address of the machine will be displayed.

BR-6641 discovers that a machine in WAN conflicts with Network Setting on

BR-6641. For example, a public IP address should be in DMZ but is used by a

machine in WAN. An error message with the conflicting IP address and MAC

address of the machine will be displayed.

Ping is used to detect network condition by sending ICMP packets to a

Ping:

target device.

You may specify a target device in the Target IP field. It accepts either an IP

address or a host name. Select a network interface, WAN or LAN. If it is WAN,

select WAN link number in Index field. As to the error message about ICMP, please

refer to the concerned document.

Note: If a domain name is used to ping, a DNS server has to be specified in [Network ]→[Host

Names].

Trace Route:

Trace route is used to detect network condition by showing the

routing path from BR-6641 to the target device.

You may specify a target device in the Target IP field. It accepts either an IP

address or a host name. Select a network interface, WAN or LAN. If it is WAN,

select WAN link number in Index field. For ICMP related error messages, please

BR-6641 User Manual

Table of Contents