Copying From Dvd To Vcr; On-Screen Display - Vcr - LG V1940MH Owner's Manual

Copying from DVD to VCR

Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
1. Insert the disc you wish to copy into the DVD
deck and close the disc tray.
2. Insert a blank VHS video tape into the VCR deck.
3. Find the place on the DVD from which you want
to start dubbing using the PLAY, FF, REW and
PAUSE functions.
For best results, pause playback at the point from
which you want to record.
4. Press the REC/ITR (z). The DVD goes into PLAY
mode and the VCR goes into RECORD mode. If
the DVD disc menu appears, you may need to
press N (PLAY) manually to begin copying.
5. When the DVD is finished playing,
press STOP (x) to end copying.
Notes:
• If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs (or Discs). "Lock" is
displayed in the display window.
• You must stop the copy process manually when the
DVD movie ends, or the unit may replay and record over
and over again.
• When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.

On-Screen Display - VCR

On-Screen Display - VCR
Some of these functions will be displayed every time
the DVD+VCR is operated.
❶ ❷ ❸
PLAY HI-FI
SP STEREO
OCT 8 , SAT 2:15 PM
❻
❶ TAPE SPEED DISPLAY
(MONO is not displayed)
❻ DATE DISPLAY
❷ FUNCTION DISPLAY
❼ CLOCK/ COUNT/
❸ HI-FI DISPLAY
REMAIN DISPLAY
❹ CHANNEL DISPLAY
❺ STEREO/SAP DISPLAY
Each press of the ENTER changes the TV screen in
the following sequence.
STOP
SP
APR 30 , SAT
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
CLK/CNT to select the real-time counter display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press CLK/CNT until the real-time counter is dis-
3. At the point that you want to locate later, reset the
4. Continue to play or record.
5. Press STOP (x) when recording or playback fin-
6. Press BACKWARD (
❹ ❺
Tape Remaining
This function displays the amount of time remaining
on the tape during recording or playback. Press
CH 4
CLK/CNT repeatedly until the REM indicator displays
on the TV screen during recording or playback.
The remaining tape length may not be displayed cor-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
❼ Notes:
• The function displays can be seen displayed on the TV
screen for 5 seconds.
• The clock (or tape counter, tape remaining) mode will be
displayed until you press ENTER.
• The tape counter and the remaining tape length indica-
tor appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
CH 4
STEREO
2:15 PM
2:15 PM
0:35:40
2:15 AM 0:05:25
CLOCK COUNTER REMAINING TIME
played on the TV screen.
real-time counter to "0:00:00" by pressing CLEAR.
ishes.
m
). The tape automatically
stops when the tape counter returns to about
"0:00:00".
REM 1:58
REM 1:07
27