Table of Contents
Advertisement
Viewing pictures from the connected equipment
Turn on the connected equipment, then press
Press F/f to select the desired input source, then press
2 seconds pass without any operation after pressing F/f.) When the input source is set to "Skip"
in the "Video Labels" under the "AV Set-up" menu (page 28), that input does not appear in the
list.
z • Press
/
on the top edge of the TV to display the connected equipment list and select the desired input source.
You can also press F/f to select the desired input source. Then wait for 2 seconds to display the selected input
source.
Jacks/
Input symbol on screen
A HDMI IN 2
I HDMI IN 1 or 3
HDMI 1 or
HDMI 2 or
HDMI 3
B
2, and
2
Video 2
C i
D
1 or
1 or 3,
and
1 or 3
Video 1 or
Video 1 or
Video 3
E
/
F
/
1 or 2
HD/DVD 1 or
HD/DVD 2
G
Description
Connect to the HDMI IN 1, 2 or 3 jack if the equipment has an HDMI jack. The digital
video and audio signals are input from the equipment. In addition, when you connect
the equipment that is compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 29 to set-up this communication. If
the equipment has a DVI jack, connect the DVI jack to the HDMI IN 3 jack through a
DVI - HDMI adaptor interface (not supplied), and connect the equipment's audio out
jack to the audio in jack in the HDMI IN 3 jacks.
• The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p,
720p (50/60 Hz), 1080i (50/60 Hz), 1080p (50/60 Hz) and 1080/24p.
• Be sure to use only an HDMI cable that bears the HDMI logo (recommended
Sony HDMI cable).
• When connecting an audio system with HDMI jack, be sure to also connect to the
audio output jacks
on audio system.
• When connect to PC, it is recommended to use PC IN jacks.
This LCD TV may not support all the signals output from the PC's HDMI
output jack.
Connect to the video jack
equipment, connect to the L(MONO) jack
Connect to the i jack to listen to sound from the TV on headphones.
Connect to the S video jack
1 or 3. To avoid picture noise, do not connect the camcorder to the video jack
and the S video jack
1 at the same time. If you connect mono equipment, connect
to the L(MONO) jack
1 or 3.
Connect to the video output jack
audio output jacks
to record the sound from the TV on DVD recorder or VCR. To
turn off the sound of the TV speakers, set "Speaker" to "Audio System" (page 29). If
you connect mono equipment, connect to the L jack
• The monitor output jacks cannot support HD/DVD, HDMI and PC signals source
pictures, also digital audio signal for sound.
Connect to the component jacks and the audio jacks
quality, component connection is recommended if your DVD player has a component
video output.
Connect to the audio output jacks
equipment. To turn off the sound of the TV speakers, set "Speaker" to "Audio System"
(page 29).
to display the connected equipment list.
. (The highlighted item is selected if
(refer G in page 16) to listen to the sound from the TV
2, and the audio jacks
2. If you connect mono
2.
1 or the video jack
1 or 3, and the audio jacks
to record the image from the TV. Connect to the
.
/
to listen to the sound from the TV on Hi-Fi audio
1
1 or 2. For better picture
Continued
17
GB
Advertisement
Chapters
Table of Contents
