Troubleshooting; Specifications - Royal Sovereign Quick Ready APL-340U Owner's Manual

TRoUBLeSHooTIng

Symptom
Motor does not work.
Pouches are not laminating correctly.
The machine is beeping and the pouch is returning
out of the front of the machine.
The rollers are moving, but the laminated item is not.
If you are still having complications, please contact Royal Sovereign's Service Center at 1-800-397-1025.

SPecIfIcATIonS

Model
Dimensions
Maximum laminating width
Film thickness
Number of rollers
Cold mode
Heating system
Ready time
Motor type
Laminating speed
Weight
Voltage/Cycle
Power consumption
Solution
Check to make sure machine is plugged in. Check to make sure the power
button is turned on.
Make sure that the machine is set to the correct setting. The setting should be
the same as the thickness of the pouch you are using. ie. 3 mil pouch film
should be set to 3 mil setting.
The automatic reverse function has turned on to retrieve the item. The item you
are laminating may be jammed or too large to pass the rollers. Wait for the
pouch to exit the front of the machine. You can try laminating again after 8
seconds.
Hold down the reverse button until the entire pouch has exited the front of the
machine. You can try laminating again after 8 seconds.
22" x 9.8" x 6.5" / 560 x 250 x 165(mm)
3~7 mil / 75~175 micron
Approximately 1 minute
20" per min / 520 mm per min
7
APL-340U
APL-340U
13.4" / 340mm
4
Yes
Quartz type
AC motor
13.2lbs/6kg
120V, 60Hz
1,330W