Intex Krystal Clear 602G Owner's Manual page 6

SETUP INSTRUCTIONS (continued)
Position this product away from the pool, so as to prevent children from
climbing on it and accessing the pool.
To inspect and change the filter cartridge, disconnect line cord, unscrew the pool inlet
nozzle (10) and strainer grid (11) from the strainer connectors and insert the hat-like plugs
into the strainer connectors before servicing the filter. After service, open the air release valve,
remove the plugs, allow any air to escape through the valve before tightening the valve again
and replace the pool inlet nozzle (10) and strain grid (11). The pump is now primed with water
again and may be turned on.
AIR RELEASE
VALVE
THREADED
COVER
FILTER
CARTRIDGE
INSIDE
UPPER PUMP
CONNECTION
LOWER PUMP
CONNECTION
TRANSFORMER
The installation instruction shall provide information on requirements specified for the electrical
installation and shall include reference to national wiring rules.
For your own personal safety, it is very important that you place your transformer more than 3.5m
away from your pump.
SAVE THESE INSTRUCTIONS
(257GS) MODEL 602G FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 06/25/2014
WARNING
UPPER PROTRUDING
HOSE CONNECTION
HOSE
HOSE
CLAMP
3.5 m
English
WATER LEVEL
POOL INLET
NOZZLE
(REMOVE)
PLUG
STRAINER GRID
(REMOVE)
INSIDE OF POOL
(ILLUSTRATION NOT TO SCALE)
257
GS
Page 6