Product Features - HoMedics ER-BS200H Instructions For Use Manual

PRODUCT FEATURES:

INSTRUCTIONS FOR USE:
Before using, place the Ergonomic Back Support in a cool and ventilated area for
some time, in order to eliminate any residue smell of material. The Ergonomic
Back Support is USB rechargeable and can be used with or without the Cover and
Heat function.
How to use
1. Place the back support on a chair.
2. Strap the back support securely on the chair by using the strap on the back
of the product.
3. Choose the preferred height by pressing the button (Fig. 1) to slide the back
support up and down (Fig.2). The Ergonomic Back Support has 5 levels of
adjustable height up to 85mm (Fig. 3).
Heat function
To use the ergonomic back support with heat, add the cotton cover to the back
support. The heat function does not work without the cotton cover.
1. Connect the 80cm USB cord on the fabric cover to the power bank. A full
charge requires approximately 3 hours for 2 hours use.
2. Turn on the power button on the fabric cover to activate the heat
function; a red light will switch on. The Ergonomic Back Support can be used
while the power bank is plugged in.
3. The Ergonomic Back Support can heat up to 42°C. It takes approximately 3
minutes to heat up to 33°C and approximately 15 minutes to reach 42°C.
Cover
Power bank
Back support parts
Belt
Adjustment button
4. Turn off the appliance by pressing the power
switch off.
Cleaning
Note: This product cannot be washed. If accidentally stained during use, use a
dry towel to carefully remove the dirt.
Unplug the appliance and allow to cool before cleaning. Only use a dry cloth to
wipe dirt on the surface of the product.
• Never allow water or any other liquids to come into contact with the appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc
to clean.
Do not dry clean. Do not wash. Do not bleach.
Not to be used by very young children (0-3 years). Do not insert pins.
Read operator's manual
Storage
Always turn of the appliance first and wait for it to cool down. Place the
appliance in its box or in a safe, dry, cool place. Avoid contact with sharp edges
or pointed objects which might cut or puncture the fabric surface.
GB
2 I
Fig.1
Fig.2
Fig.3
85mm
5 levels of adjustment
button; the red light will