Hasbro Nerf Hyper SIEGE-50 Quick Start Manual

CLEARING A JAM
1
2
Open access door on either side
of blaster and remove any jammed
Open hopper lid and rounds. Close door. Make sure you aim
remove any jammed the blaster away from you and anyone
rounds. Close lid. else while releasing jammed rounds.
TACTICAL RAILS
Attach Nerf Hyper™ canisters to rails for additional firepower. (Canisters not included.)
STORING YOUR BLASTER
Do not store blaster primed and ready to fire.
Hey NERF Nation!
Join us online and keep up with
the latest and greatest NERF news!
RESET SWITCH
RESET SWITCH
1
2
2
If you cannot move the slide,
pull down and hold reset switch
and pull slide all the way back.
FILL LINE Nerf Hyper rounds
are compatible
Do not fill
only with Nerf
beyond this
Hyper blasters.
line.
NERF and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc.
®
© 2020 Hasbro. TM & denote U.S. Trademarks.
Hasbro, Pawtucket, RI 02861-1059 USA. US/CANADA TEL. 1-800-255-5516.
U.S. Pat. Pend., CN, EP & US Reg. Des. Apps.
Retain this information for future reference.
F0532 PN00065926
1
HOPPER
SIEGE-50
TO AVOID EYE INJURY:
WARNING:
Use of eyewear required for players and people within
range. Use only official Hyper rounds. Do not modify
rounds or blaster. Ages 14 and up.
HOPPER LID
PRO TIPS:
READ ALL INSTRUCTIONS
Open FULLY to load.
COMPLETELY BEFORE USE.
DO NOT OVERFILL
TRIGGER PRIMING SLIDE
PRO TIPS:
Pull slide ALL THE WAY
back. Push slide ALL
THE WAY forward.
Do not tilt front of
blaster up when
™
priming.
Do not aim at eyes or face.
14
+