Advertisement
2.
Take the mounting bracket, put it on the target area by
aligning the holes and fix it with the supplied screws.
3.
Plug the RJ-45 Ethernet cable into the PoE port of the
WMC303-1200.
4.
Load the device into the mounting bracket, and be sure
the device is mated with two fixed screws. Then, rotate the
device clockwise to lock it in position.
2
5.
Plug the other end of the Ethernet cable into the PoE
switch.
Wired Network Connection (Windows 7)
A computer with wired Ethernet connection is required for the
first-time configuration of the Wireless AP.
1.
Click "Start" button located at the lower-left corner of your
computer.
2.
Click "Control Panel".
3.
Double click "Network and Sharing Center" icon.
4.
Click "Change Adapter Settings".
5.
Double click "Local Area Connection".
6.
Select "Internet Protocol Version 4(TCP/IPv4)" and click
"Properties".
7.
Select "Use the following IP address"and then click "OK"
button twice to save the configuration. For example, as the
default IP address of the WMC303-1200 is 192.168.0.100
and the router is 192.168.0.254, you may choose from
192.168.0.1 to 192.168.0.252.
IFS WMC303-1W-1T-1200 Quick Start Guide
Advertisement
