Advertisement
Quick Links
Advertisement
Related Manuals for Crosley CF100360
Summary of Contents for Crosley CF100360
- Page 1 ” Low Profile TV Stand CF100360...
- Page 2 Left Panel Top Rail Right Panel Left Vertical Panel Right Vertical Panel 1 PC 1 PC 1 PC 1 PC 1 PC Top Panel Bottom Panel Back Panel Middle Back Panel Adjustable Shelf 1 PC 1 PC 2 PCS 1 PC 2 PCS Middle Adjustable Left Middle Door...
- Page 3 Cam Bolt Wood Dowel Screw Allen Bolt Cam Lock 4 PCS 10 PCS 10 PCS 8 PCS 20 PCS Spring Washer Magnet Double Magnet Round Head Screw Flat Washer 1 PC 8 PCS 2 PCS 13 PCS 8 PCS Shelf Holder Knob Round Head Bolt Allen Wrench...
- Page 4 Insert cam bolts (part #2) into left panel (part A), right panel (part B) and top panel (part F) using phillips head screwdriver. NOTE: Do not overtighten cam bolts. Stop tightening once threads on cam bolt are no longer visible. A&B Attach top rail (part E) to left vertical panel (part C) and right vertical panel (part D) using wood dowels (part #3) and screws (part #4).
- Page 5 Attach left panel (part A) and right panel (part B) to top rail (part E) using wood dowels (part #3) and cam locks (part #1). NOTE: Cam locks must rotate full 180°. See pictured insert. Attach top panel (part F) to assembled unit (parts A, B, C, D & E) using wood dowels (part #3), cam locks (part #1), screws (part #4) and phillips head screwdriver.
- Page 6 Carefully turn unit upside down on a soft flat surface, such as carpet, as shown below. Slide back panels (part H) and middle back panel (part I) into the grooves of assembled unit (parts A, B, C, D & F). Attach magnets (part #8) and double magnet (part #9) to top rail (part E) using round head screws (part #10) and phillips head screwdriver.
- Page 7 Carefully turn unit upright. Screw round head screws (part #10) into back panels (part H) and middle back panel (part I) using phillips head screwdriver. Place shelf holders (part #11) into desired position and then slide adjustable shelves (part J) and middle adjustable shelf (part K) into place.
- Page 8 Attach knobs (Part #12) to left middle door panel (part L), right middle door panel (part M), left door panel (part N) and right door panel (part O) using round head bolts (part #13) and phillips head screwdriver. Attach left middle door panel (part L), right middle door panel (part M), left door panel (part N) and right door panel (part O) by placing bottom pin hinge (pre-installed in door) in the pre-drilled hole of bottom panel (part G).
- Page 9 Carefully lay unit down. Attach long support legs (part P) or short support legs (part Q) to bottom panel (part G) by turning clockwise into the center pre-drilled holes. Short support legs (part Q) should only be used with Bun Feet.