Setting The Dishwasher; Switching The Dishwasher On And Off; Ending Or Changing A Program - AEG Inventum VVW6025A Instruction Manual

5

setting the dishwasher

SWITCHING THE DISHWASHER ON AND OFF

4 3
• Switch the dishwasher on by pressing the On/off button (4).
• Select the desired program with the program selector knob (1).
• If you prefer, you can choose an additional function, like prewash.
• Press the Start/Pause button (2) to start the program. The light in the Start/Pause button turns off and the indicator
light of Washing (3) switches off.
You can follow the progress of the program using the indicator lights on the control panel. As long as the dishwasher is
washing, rinsing or drying, the indicator light (3) will be on. The dishwasher remains silent for about 40-50 minutes whilst
drying. When the indicator light Ready (3) lights up, the program is finished.
• Switch the dishwasher of with the On/off button (4).
NOTE! You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and
cutlery will still be very hot and may break as a result of the heat. Moreover, the dishes dry better when allowed
to stand for a few minutes.

ENDING OR CHANGING A PROGRAM

If you would like to end a program of change a program while a washing cycle is already running.
• Press the Start/Pause button (2). The light in the Start/Pause button will flash indicating the program is paused.
• Turn the program selector knob (1) to the setting ● (Reset).
• Press the Start/Pause button (2) to cancel the program.
The dishwasher will discharge the water in it for nearly 30 seconds.
• As soon as the program has ended, the indicator light Ready (3) will light up.
• Switch the dishwasher off with the On/off button (4) or select another program using the program selector knob (1)
and switch the dishwasher on again.
1
2
English
41
•